FANS
With over 90 years
experience, Woods are the acknowledged world leaders in the design and
manufacture of industrial ventilation equipment
No other manufacturer in this industry offers a greater range of
products than Woods do. Offering every form of fan configuration
including axial, mixed flow and roof units to complete packaged air
handling systems, Woods can provide the optimum result.
Wherever air movement technology is required – from the ventilation of
offices to underground railways, temperature control of poultry houses
to engine test cells, and maintenance of delicate environments of clean
rooms to pharmaceutical plants
Woods have the ideal
solution.
AX3
INLINE MIXED FLOW
These fans are small
in size and quiet in operation, and are normally used for the
ventilation of clean air, where space is restricted.
Offered with sizes from 200 mm to 760 mm diameter, and volume
flows up to 8.4 m3/s and Static pressure developments up to 900 Pa.
IN-LINE AXIAL FANS
Ideal for installation with flexible ductwork systems,
available in sizes from 150mm to 350mm. Fully Speed controllable, with
single phase motors. Duties are medium to high volume flow rate at
medium to low pressures.
INLINE CENTRIFUGAL FANS
Centrifugal fans are those that use centrifugal
force created by the rotating fan wheel to move the air, The fan
housings are moulded fiberglass providing strength and durability, yet
light weight. Models are fitted with external motors suitable for
single phase connection with sealed for life bearings duties are
generally medium to low volume flow rates at medium to high pressures
INLINE MIXED FLOW FANS
Suitable for most domestic and commercial applications
particularly where space is limited. Mixed flow fans offer almost two
and a half times the pressure of conventional axial fans making them
ideal for many ducted applications.
TUBE AXIAL
Tube axial fans designed as an integrated unit
offering a guaranteed performance with high efficiency, economy and
durability. Tube axial fans have the option of plain spigot or
flanged connection. Pre-wired with optional speed controller. 3phase
or 1phase available. Mounting Feet and matching flanges also
available.
ROOF FANS
The Whisper range of roof exhaust
fans have been designed as an integrated unit offering a guaranteed
performance with high efficiency, economy and durability. All motors
are IP56 and Class F insulation and can operation in ambient
temperatures up to 50° and in wet conditions or 100% humidity. A
unique design of the motor winding allows connection to either
single or three phase power, by simple reconfiguration of the
connections within the terminal box.
ROOF EXTRACT FAN
This cost effective fan provides the following major
benefits, installation has never been this easy, simply cut a hole
in the roof, slip the tube through and flash with an Aquaseal. No
motor noise in the room or roof space as all moving parts are
outside the building. Low sound level, high capacity.
ROOF MOUNTED FILTERED
SUPPLY UNIT
Easy installation, saving costs, low
sound level, high capacity. Filter incorporated into the cowling,
easily serviceable, removable cow.
PLATE FANS
Oue range of wall plate
fans have been designed as an integrated unit offering a guaranteed
performance with high efficiency, economy and durability. UV stabilized plastic bellmouth inlet cone provides
10-20% increase in air volume at no extra power consumption. The fan is
independently supported form four machined corner bushes which connect
through the wire guard and structurally take the weight of the fan
whilst providing easy and secure fixing to the wall.
WALL EXTRACT FAN
This unit can be installed either as a
wall down discharge or mounted up under a soffit as a side discharge
unit. Lowest sound level as the fan is remote mounted in unit
outside. The unit is fitted with angled discharge louvres to direct
the air away form the building. Aluminium fan cage with galvanised
case and birdmesh.
AC EXTERNAL ROTOR &
FAN
Axial fans are available in 7 model
sizes with impeller diameters 300 to 630mm all mounted with external
rotor motor. Fans are supplied with grilles designed to comply with
safety regulations. The fans are rated single phase. These fans are
normally used in refrigeration, ventilation and air conditioning
applications.
AC & DC COOLING FANS
AC axial tube fans & DC brushless fans,
Aluminium diecast frames, black thermoplastic impellers Frame sizes
80, 92 & 120mm. Low cost, long life, low noise, wide range of
models, choice of ball or sleeve bearings.
WALL FANS
To
cool off environment, suitable for industrial and warehouse. High
performance motor with quiet operation and efficient cooling.
Precisely designed motor for heavy-duty non-stop operation. 3 speed
control, smooth oscillation.
PEDESTAL FANS
To
cool off environment, suitable for industrial and warehouse. High
performance motor with quiet operation and efficient cooling.
Precisely designed motor for heavy-duty non-stop operation. 3 speed
control, smooth oscillation.
PORTABLE AIR VENTILATOR
Exhaust ordour and watts gas effectively and
efficiently to outdoors. Plastic handle for easy carrying. Size
300mm Weight 18kg. Ideal for working places like electric soldering,
tunnels, basement, smoking rooms, vessels etc.
CEILING FANS
Ceiling fans provide comfort & style all year long.
CONTROLLERS & GRAVITY SHUTTERS
RECOMMENDATION
FOR AIR CHANGES PER HOUR
Guide only individual requirements may vary
Application - Air Changes per hour
Bathrooms 5-8
Kitchens (Private) 10-15
Laundries 10-30
Toilets (Domestic) 2-3
Toilets (Office) 3-5
Toilets (Factory) 8-10
Meeting Rooms 5-10
Offices 4-8
Cafés 10-12
Canteens 4-6
Garages 3-8
Kitchens (hotels, schools etc) 15-20
Restaurants 6-10
